Welcome To Shijiazhuang Yongda Pump Co., Ltd.

ZJE-II Series Filter Press Dedicated Feed Pump

This pump features a single-stage single-suction cantilever horizontal centrifugal pump with a cartridge-connected single pump casing structure. It has advantages such as lightweight, good cavitation performance, strong abrasion resistance, wide flow passage, and convenient installation and use. It can continuously transport large particle highly abrasive mud and sand, making it suitable for dredging operations on dredging vessels and river dredging.

Commodity name： ZJE-II Series Filter Press Dedicated Feed Pump

Category:

Pumps/Spare Parts

Email:

service@yongdapump.com

Get Quote

Also Like

Description

Brief Description

The ZJE-II special pump is a type of impurity pump with unique performance. In recent years, it has been referred to by industry professionals as the "special feeding pump for filter presses." This pump draws slurry from the rear, features a simple packing seal with no leakage, and importantly, its flow and head curves are very steep, making it suitable for certain special working conditions.

Features

1. Advanced and novel hydraulic and structural design, high efficiency, wear resistance, stable and reliable operation;

2. Large feeding flow and low pressure in the early stage;

3. Small squeezing flow and high pressure in the later stage;

4. Simple and reliable shaft seal, no water injection, no mechanical seal, no leakage;

5. No variable frequency speed regulation for filter press feeding, capable of transporting high concentration.

Selection

The main technical parameters listed in this document are for the pump at 1480r/min. For working conditions requiring low pressure, the impeller can be appropriately trimmed or the pump speed can be reduced. The ZJ series slurry pump produced by our factory can also be selected, and the mechanical seal of the Z-type pump is the same as that of the ZJE-II pump, "no leakage." This document only provides basic dimensions for a few direct drive connections. Due to terrain limitations or the need to change pump speed, basic dimensions for belt drive will be designed separately based on specific data provided on-site. Common belt drive methods include tail frame type, parallel type, and back support type.

This pump is a pressure-in suction pump with a small suction lift. It is recommended that the feeding liquid level be higher than the center height of the pump. The diameter of the inlet and outlet pipelines is generally the same as or slightly larger than the pump's inlet and outlet diameters. Therefore, the liquid concentration is mostly high, and the pump's inlet pipeline should not be too long to avoid affecting the suction.

Exhibition Information

Qualifications and Honors

Packaging and Shipping

Keywords:

Get A Quote

Note: Please leave your email address, our professionals will contact you as soon as possible!

Submit

ZJE-II Series Filter Press Dedicated Feed Pump

Brief Description

Features

Selection

Exhibition Information

Qualifications and Honors

Packaging and Shipping